Lifting Eye Bolts
A bolt on which a crane wire is hooked when installing a mold to the molding machine. It is installed with the…
Technology
Technology
Lifting Eye Bolts
A bolt on which a crane wire is hooked when installing a mold to the...
Continue reading
31
Jan
Jan
Technology
Guide Rails
A part that functions as a guide for a slide core, preventing floating of a...
Continue reading
31
Jan
Jan
Technology
Injection Molding
One of the molding methods for plastics. A molding material is mixed in the injection...
Continue reading
30
Jan
Jan
Technology
Counter
A counter that counts the number of ejections after the completion of mold clamping when...
Continue reading
30
Jan
Jan
Technology
Guide Pins / Guide Bush
Guide pin and bush are have a pin and a cylindrical part that function as...
Continue reading
30
Jan
Jan
Guide Rails
A part that functions as a guide for a slide core, preventing floating of a slide core. Holds down the right and…
Injection Molding
One of the molding methods for plastics. A molding material is mixed in the injection cylinder, plasticated and melted, and then injected into the mold by…
Counter
A counter that counts the number of ejections after the completion of mold clamping when in full automatic or semi automatic operation. It is used to…
Guide Pins / Guide Bush
Guide pin and bush are have a pin and a cylindrical part that function as a guide to position a core plate and a cavity plate.…
Ejector Pins
Also called an extrusion pin. A pin within a mold to eject parts from the mold. Since high abrasion resistance and toughness are required, the special…
Ejector Guide Pins / Ejector Guide Bush
An ejector guide pin is also called a push plate guide pin and functions as a guide for sliding of an ejector plate. Because an ejector…
Ejector Plate
Also called a push plate. A plate that supports an edge of an ejector pin or a return pin to eject a part from a mold.…
Push Rods
A shaft linked to the force (hydraulic or mechanical) of the molding machine in order to get the ejector plate to work.
Angular Pins
A angled pin used to slide a slide core. The tilt angle for an angular pin should be under 25 degrees at the maximum.
